Service Hotline
18070781637
Email
18070781637@163.com
Schmersal SLG440AS-ER-0900-04 (Order No: 103007557) is a genuine safety light curtains engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -10 ... +50 °C; Ambi...
Glorient offers competitive supply of Schmersal SLG440AS-ER-0900-04, Order No: 103007557. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to SLG440AS-ER-0900-04, Glorient also supplies:
| Gross weight | 1,630 g |
| Net weight | 1,630 g |
| Ambient temperature | -10 ... +50 °C |
| Ambient temperature, maximum | +50 °C |
| Ambient temperature, minimum | -10 °C |
| Standards | EN IEC 61496-1 |
| IP Degree of protection | IP67 |
| Certificates | cULus |
| Housing material | Aluminium |
| EAN (European Article Number) | 4030661449395 |
| Mission time | 20 |
| Termination | Connector |
| Length of sensor | 33 mm |
| Width of sensor | 27.8 mm |
| Traceparts | Yes |
| Safety functions | Yes |
| Resistance to vibrations | 10 … 55 Hz, amplitude 0.35 mm |
| Storage and transport temperature | -25 ... +70 °C |
| Storage and transport temperature, maximum | +70 °C |
| Storage and transport temperature, minimum | -25 °C |
| Degree of pollution | 2 |
| Protection class | III |
| Other Parameters | Number of beams: 4 | Power consumption, Transmitter: 75 | Range, protection field, minimum: 0.3 | Note (LED switching conditions display): (1) green/red LED (AS-i duo LED): Supply voltage / communication error / slave address = 0 / periphery error detected | Restistance to shock: 10 g / 16 ms | AS-i Outputs, DO 0 … DO 3: No Function | EPLAN: Yes | Fuse rating: 4 | NOTE_VOLT_RATED_OPERAT_ASI: Protection against polarity reversal | Integral system diagnostics, status: Yes | Power consumption, Receiver: 150 | AS-i Parameter bits, P3: Internal device error (FID) | AS-i Input module address: 0 | Rated operating voltage: 24 VDC -15% / +10% (stabilised PELV) | Note (AS-i Operating voltage): Protection against polarity reversal | PFH value: 5.17 x 10⁻⁹ | AS-i Parameter bits, P1: Low beam quality | Note (AS-i Input module address): Preset to address 0, can be changed through AS-interface bus master or hand-held programming device | 7-segment display: Yes | AS-i Specification: Safety-Slave | Note (AS-i Parameter bits): FID: periphery error | Note voltage AUX DC: stabilised PELV power supply | AS-i Parameter bits, P2: No function | AS-i Version : V 3.0 | Blanking function: Yes | VOLT_TYPE_AUX: DC | AS-i Input, Channel 2: Data bits DI 2 / DI 3 = dynamic code transmission | Detection ability for test bodies at v = 1.6 m/s: 300 | Working principle: optoelectronic | Category: 4 | TOL_VOLT_OPERAT_AUX_DC_MAX: 10 | Range, protection field, maximum: 12 | Terminal, Connector, Transmitter: Connector plug M12, 4-pole | Height of transmitter: 1,043 | Reaction time, maximum: 18 | AS-i Input, Channel 1: Data bits DI 0 / DI 1 = dynamic code transmission | TOL_VOLT_OPERAT_AUX_DC_MIN: -15 | Terminal connector, Recipient: Connector plug M12, 5-pole | Safety Integrity Level (SIL), suitable for applications in: 3 | Operating voltage: 24 VDC -15 % / +10 % (stabilised PELV power supply) | AS-i Parameter bits, P0: No function | Height of Receiver: 1,063 | AS-i Device protection: Internal short-circuit proof | AS-i Current consumption, maximum: 50 | AS-i Operating voltage, minimum: 18 | VOLT_TYPE_ASI: DC | Overvoltage category: 3 | Protection class (Operating resource): 3 | AS-i Profile : S-0.B.F.E | Safety type in accordance with IEC 61496-1: 4 | VOLT_RATED_OPERAT_ASI_DC_MAX: 31.6 | Wave length of the laserdiode: 880 | AS-i Operating voltage AS-i maximum: 31.6 | Performance Level, up to: e | Beam distance: 300 | VOLT_RATED_OPERAT_ASI_DC_MIN: 18 |
