Service Hotline
18070781637
Email
18070781637@163.com
Schmersal PS116-T12-STR-J203 (Order No: 103009978) is a genuine modular limit switches engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -30 ... +80 °C; Ambi...
Glorient offers competitive supply of Schmersal PS116-T12-STR-J203, Order No: 103009978. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to PS116-T12-STR-J203, Glorient also supplies:
| Gross weight | 122 g |
| Net weight | 122 g |
| Ambient temperature | -30 ... +80 °C |
| Ambient temperature, maximum | 1000684721 °C |
| Ambient temperature, minimum | -30 °C |
| Standards | EN IEC 60947-5-1 |
| IP Degree of protection | IP66 |
| Certificates | cULus |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, zinc die-cast, chromated |
| EAN (European Article Number) | 4030661468648 |
| Termination | Connector M12, 6-pole |
| Mechanical lifetime, minimum | 10,000,000 |
| Length of sensor | 16.6 mm |
| Switching element | 1 NO contact, 2 NC contacts |
| Switching principle | Slow action |
| Width of sensor | 31 mm |
| Material of the contacts, electrical | Silver |
| Utilisation category DC-13 | 24 |
| Utilisation category AC-15 | 1.5 |
| Maximum switching frequency | 5,000 Hz |
| Actuating element | Rod lever J200 |
| Required rated short-circuit current | 400 A |
| Actuating speed, maximum | 1 m/s |
| Traceparts | Yes |
| Housing construction form | Norm construction design |
| Degree of pollution | 3 |
| Protection class | II |
| Other Parameters | Actuating speed, minimum: 60 | Number of cable wires: 6 | Actuating torque, minimum: 0.2 | Number of normally open (NO): 1 | Positive break torque: 0.6 | CADENAS: Yes | Bounce duration, maximum: 3 | Connector position : Right | Terminal (mechanical): right | Number of normally closed (NC): 2 | Switchover time, maximum: 5.5 | Active area: Metal film | Positive break force, minimum: 40 | Wire cross-section: 0.5 | Length x Width x Height: Height of sensor: 169 mm (rod centre) | Diameter of the Rod: 6 | Length of the lever: 200 |
