Service Hotline
18070781637
Email
18070781637@163.com
Schmersal PS216L-Z11-H200 (Order No: 103027034) is a genuine modular limit switches engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Mounting: Enclosure with mounting slots; Amb...
Glorient offers competitive supply of Schmersal PS216L-Z11-H200, Order No: 103027034. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to PS216L-Z11-H200, Glorient also supplies:
| Gross weight | 122 g |
| Net weight | 122 g |
| Ambient temperature | -30 ... +80 °C |
| Ambient temperature, maximum | 1000263428 °C |
| Ambient temperature, minimum | -30 °C |
| Standards | EN IEC 60947-5-1 |
| IP Degree of protection | IP66 |
| Certificates | cULus |
| Housing material | Plastic, glass-fibre-reinforced |
| EAN (European Article Number) | 4030661518961 |
| Mission time | 20 |
| Termination | Screw terminals M20 x 1.5 |
| Mechanical lifetime, minimum | 10,000,000 |
| Length of sensor | 32.5 mm |
| Switching element | 1 NO contact, 1 NC contacts |
| Switching principle | Snap action |
| Width of sensor | 31 mm |
| Thermal test current | 10 A |
| Cable section, maximum | 1.5 mm² |
| Height of sensor | 112.5 mm |
| Material of the contacts, electrical | Silver |
| Utilisation category DC-13 | 24 VDC / 1 A |
| Max. fuse rating | 6 A gG D-fuse |
| Utilisation category AC-15 | 3 |
| Maximum switching frequency | 5,000 Hz |
| Cable section, minimum | 0.34 mm² |
| Number of safety contacts | 1 / 2 |
| Actuating element | Roller lever H200 |
| Required rated short-circuit current | 400 A |
| Actuating speed, maximum | 1 m/s |
| Number of auxiliary contacts | 1 / 2 |
| Traceparts | Yes |
| Housing construction form | Norm construction design |
| Safety functions | Yes |
| Mounting | Enclosure with mounting slots |
| Degree of pollution | 3 |
| Protection class | II |
| Other Parameters | Actuating speed, minimum: 10 | Cable section: 0.34 mm² ... 1.5 mm² | Note (Cable entry): Settle length of the conductor 5...6mm | Diameter of Castor: 16 | Tightening torque of electrical connection, minimum: 0.6 | Roller material: Plastic | Tightening torque of electrical connection: 0.6 ... 0.8 Nm | Installation instructions: mit Querlangloch | Actuator type to EN 50047: A | Tightening torque of the fixing screws: 1.2 | Position of the cable gland: bottom | Tightening torque of electrical connection, maximum: 0.8 | Positive break force, minimum: 40 |
