Service Hotline
18070781637
Email
18070781637@163.com
Schmersal PS216-Z11-S221 (Order No: 103035351) is a genuine modular limit switches engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -30 ... +80 °C; Ambient ...
Glorient offers competitive supply of Schmersal PS216-Z11-S221, Order No: 103035351. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to PS216-Z11-S221, Glorient also supplies:
| Ambient temperature | -30 ... +80 °C |
| Ambient temperature, maximum | +80 °C |
| Ambient temperature, minimum | -30 °C |
| Standards | EN IEC 60947-5-1 |
| IP Degree of protection | IP66 |
| Certificates | cULus |
| Housing material | Plastic, glass-fibre-reinforced |
| EAN (European Article Number) | 4030661539737 |
| Mission time | 20 |
| Termination | Screw terminals M20 x 1.5 |
| Mechanical lifetime, minimum | 10,000,000 |
| Length of sensor | 32.5 mm |
| Switching element | 1 NO contact, 1 NC contacts |
| Switching principle | Snap action |
| Width of sensor | 31 mm |
| Thermal test current | 10 A |
| Cable section, maximum | 1.5 mm² |
| Height of sensor | 75.5 mm |
| Material of the contacts, electrical | Silver |
| Utilisation category DC-13 | 24 VDC / 1 A |
| Max. fuse rating | 6 A gG D-fuse |
| Utilisation category AC-15 | 3 |
| Maximum switching frequency | 5,000 Hz |
| Cable section, minimum | 0.34 mm² |
| Number of safety contacts | 1 |
| Actuating element | Plunger S221 |
| Required rated short-circuit current | 400 A |
| Actuating speed, maximum | 1 m/s |
| Number of auxiliary contacts | 1 |
| Traceparts | Yes |
| Housing construction form | Norm construction design |
| Safety functions | Yes |
| Degree of pollution | 3 |
| Protection class | II |
| Other Parameters | Actuating speed, minimum: 10 | Cable section: 0.34 mm² ... 1.5 mm² | Note (Cable entry): Settle length of the conductor 5...6mm | Tightening torque of electrical connection, minimum: 0.6 | Actuator type to EN 50047: B | Material of the actuator: Stainless steel (1.4104) | Tightening torque of electrical connection: 0.6 ... 0.8 Nm | Tightening torque of the fixing screws: 1.2 | Position of the cable gland: bottom | Plunger material: Stainless steel (V2A) | Tightening torque of electrical connection, maximum: 0.8 | Positive break force, minimum: 40 |
