Service Hotline
18070781637
Email
18070781637@163.com
Schmersal AZM 161CC-12/12RIED/TU-024-B1 (Order No: 103035469) is a genuine solenoid safety locks engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Mounting: Screws; Ambient tempe...
Glorient offers competitive supply of Schmersal AZM 161CC-12/12RIED/TU-024-B1, Order No: 103035469. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to AZM 161CC-12/12RIED/TU-024-B1, Glorient also supplies:
| Gross weight | 300 g |
| Ambient temperature | -25 ... +60 °C |
| Ambient temperature, maximum | 1000078481 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN ISO 13849-1, EN ISO 14119, EN IEC 60947-5-1, BG-GS-ET-19 |
| IP Degree of protection | IP67 |
| Certificates | IFA, cULus, CCC |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661539164 |
| Mission time | 20 |
| Termination | Cage clamps |
| Mechanical lifetime, minimum | 1,000,000 |
| Length of sensor | 30 mm |
| Switching element | NO contact, NC contact |
| Switching principle | slow action, positive break NC contact |
| Width of sensor | 130 mm |
| Thermal test current | 6 A |
| Height of sensor | 90 mm |
| Material of the contacts, electrical | Silver |
| Utilisation category DC-13 | 24 VDC / 2.5 A |
| Max. fuse rating | 6 A gG D-fuse to DIN EN 60269-1 |
| Utilisation category AC-15 | 230 VAC / 4 A |
| Maximum switching frequency | 1,000 Hz |
| Number of safety contacts | 4 / 5 |
| Required rated short-circuit current | 1,000 A |
| Actuating speed, maximum | 2 m/s |
| Note | Electrical life on request. |
| Number of auxiliary contacts | 1 / 2 |
| Traceparts | Yes |
| Storage and transport temperature | -30 ... +85 °C |
| Scope of delivery | The actuator is included in the scope of delivery |
| Storage and transport temperature, maximum | +85 °C |
| Storage and transport temperature, minimum | -30 °C |
| Mounting | Screws |
| Note (General) | minimum actuating radius on rotating guard systems via the narrow edge of the actuator 180 mm |
| Protection class | II |
| Other Parameters | Voltage, Utilisation category DC-13: 24 | Voltage, Utilisation category AC-15: 230 | Test pulse interval, minimum: 50 | Power to unlock: Yes | Number of actuating directions: 3 | Test pulse duration, maximum: 5 | Rated control voltage: 24 | Note (Relative humidity): non-condensing | Note (Emergency exit): The emergency exit is used where an intervention in an already locked hazardous area is required | Performance Level, up to: e | Working principle: electromechanical | Emergency exit: Yes | Protection class (Operating resource): 2 | Magnet switch-on time: 100 | Latching force: 30 | Positive break travel: 10 | Current, Utilisation category DC-13: 4 | Material of the actuator: Stainless steel | Type of the fixing screws: 3x M6 | Positive break force, minimum: 20 | Allowed type of cable: solid single-wire | Coding: Individual coding | Current, Utilisation category AC-15: 4 | Electrical power consumption, maximum: 10 | Coding level according to EN ISO 14119: High | Please note:: Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. | Cable entry: 4 x M16 x 1,5 | Note (Manual release): Top-side (ordering suffix -ED) or rear-side (ordering suffix -EU) mounting possible | Manual release: Yes | Category: 3 | Actuating play in direction of actuation: 5.5 | Note (applications): removable guard | Tightening torque of the fastening screws for the housing cover: 0.6 | Positive break force per NC contact, minimum: 10 | Permissible installation altitude above sea level, maximum: 2,000 | Actuating radius, minimum: 150 |
