Service Hotline
18070781637
Email
18070781637@163.com
Schmersal BN 65-RZ 2,0M (Order No: 101055801) is a genuine safety door switches engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Mounting: central with threated flange; Ambient ...
Glorient offers competitive supply of Schmersal BN 65-RZ 2,0M, Order No: 101055801. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to BN 65-RZ 2,0M, Glorient also supplies:
| Gross weight | 118 g |
| Net weight | 118 g |
| Ambient temperature | -25 ... +75 °C |
| Ambient temperature, maximum | +75 °C |
| Ambient temperature, minimum | -25 °C |
| IP Degree of protection | IP67 |
| Certificates | cULus |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661009506 |
| Termination | Pre-wired cable |
| Mechanical lifetime, minimum | 1,000,000,000 |
| Length of sensor | 103 mm |
| Switching principle | Latching |
| Maximum switching frequency | 1,080,000 Hz |
| Actuating element | Magnet |
| Actuating speed, maximum | 18 m/s |
| Housing construction form | Cylinder smooth |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Scope of delivery | Actuator must be ordered separately. |
| Mounting | central with threated flange |
| Note (General) | This does not apply to the bistable contact. |
| Other Parameters | Recommendation (actuator): BP 12 N | Material of the Cable mantle: PVC | Switching voltage, maximum: 250 | width across flats: 22 | Cable sleeve: Yes | Repeat accuracy R: 0.3 | Recommendation (actuator, lift switchgear): 2 x BP 15 | Working principle: Magnetic drive | Note (switching distance): All switching distances in accordance EN IEC 60947-5-2 | Number of snap-in contacts: 1 | Wire cross-section: 18 | Bounce duration, typically: 0.6 | Bounce duration, minimum: 0.3 | Diameter of sensor: 13 | Latching: Yes | Cable type: H03VV-F | Length of cable: 2 | Bounce duration, maximum: 3 | Switching capacity, maximum: 120 | Actuation direction: Lengthwise | Suitable for elevators: Yes | Switching frequency, maximum: 300 | Number of cable wires: 2 | Switching current, maximum: 3 | Tightening torque of nuts, maximum: 3 | Minimum switching time close (NO): 0.3 | Resistant to vibration: 30 g, on sine wave oscillation | Restistance to shock: 30 g, on sine wave oscillation | Cable entry: PG9 | Maximum switching time open (NC): 0.5 | bias magnet : Yes | Active area: lateral | Maximum switching time close (NO): 1.5 |
