Service Hotline
18070781637
Email
18070781637@163.com
Schmersal T2S 422-10Y (Order No: 101058518) is a genuine safety door switches engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -30 ... +90 °C; Ambient tempe...
Glorient offers competitive supply of Schmersal T2S 422-10Y, Order No: 101058518. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to T2S 422-10Y, Glorient also supplies:
| Gross weight | 1,010 g |
| Net weight | 1,010 g |
| Ambient temperature | -30 ... +90 °C |
| Ambient temperature, maximum | +90 °C |
| Ambient temperature, minimum | -30 °C |
| Standards | EN IEC 60947-5-1 |
| IP Degree of protection | IP65 |
| Certificates | INMETRO, CCC |
| Housing material | Grey cast iron, galvanised |
| EAN (European Article Number) | 4030661253749 |
| Mechanical lifetime, minimum | 10,000,000 |
| Length of sensor | 63 mm |
| Switching element | 1 NO contact |
| Switching principle | Slow action, double break |
| Width of sensor | 106 mm |
| Thermal test current | 16 A |
| Cable section, maximum | 2.5 mm² |
| Height of sensor | 133 mm |
| Material of the contacts, electrical | Silver |
| Max. fuse rating | 16 A gG D-fuse |
| Utilisation category AC-15 | 400 |
| Maximum switching frequency | 3,000 Hz |
| Cable section, minimum | 1.5 mm² |
| Actuating element | Plunger |
| Actuating speed, maximum | 1 m/s |
| Note | All indications including the conductor ferrules. |
| Traceparts | Yes |
| Utilisation category | AC-15 |
| Note (General) | Actuation from the side of the plunger should be avoided, since this reduces the mechanical life of the position switch. |
| Other Parameters | Contact opening: max. 2 x 6 mm | Terminal (mechanical): Screw connection | Slide form: Sphere | Working principle: mechanical | Rated operating voltage: 400 | Cable entry: 2 x M20 x 1,5 | Number of normally open (NO): 1 | Wire cross-section, maximum: 13 | Note (Actuating speed): Actuating speed with vertical actuating angle to switch axis | Actuating angle: 20 | Housing coating material: painted | Diameter of the Plunger: 10 | Actuating speed, minimum: 1 | Operating current: 4,000 | Diameter of the ISO-thread: M4 | Note (Switching element): with double break |
