Service Hotline
18070781637
Email
18070781637@163.com
Schmersal BN 85-R-1824-3 5,0M (Order No: 101114790) is a genuine safety door switches engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Mounting: clamping foot 8 mm; Ambient temp...
Glorient offers competitive supply of Schmersal BN 85-R-1824-3 5,0M, Order No: 101114790. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to BN 85-R-1824-3 5,0M, Glorient also supplies:
| Gross weight | 115 g |
| Net weight | 115 g |
| Ambient temperature | +0 ... +75 °C |
| Ambient temperature, maximum | 1000078579 °C |
| Ambient temperature, minimum | 1000078579 °C |
| IP Degree of protection | IP40 |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661023564 |
| Termination | Pre-wired cable |
| Mechanical lifetime, minimum | 1,000,000,000 |
| Length of sensor | 16.5 mm |
| Switching principle | Reed contacts, Non-contact principle |
| Width of sensor | 40 mm |
| Height of sensor | 35 mm |
| Actuating speed, maximum | 18 m/s |
| Housing construction form | Block |
| Scope of delivery | Actuator must be ordered separately. |
| Mounting | clamping foot 8 mm |
| Note (General) | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. |
| Other Parameters | Recommendation (actuator): BP 8 S | Material of the Cable mantle: PVC | Switching voltage, maximum: 60 | Versions: Plug-in reed contact insert and base | Restistance to shock: 60 g, on sine wave oscillation | Recommendation (actuator, lift switchgear): 2 x BP 15 | Working principle: Magnetic drive | Note (switching distance): All switching distances in accordance EN IEC 60947-5-2 | Number of snap-in contacts: 1 | Resistant to vibration: 60 g, on sine wave oscillation | Maximum switching time open (NC): 0.07 | Cable type: LiYY | Switching capacity, maximum: 30 | Latching: Yes | Wire cross-section: 0.25 | Actuation direction: Lengthwise | Active area: front side | Suitable for elevators: Yes | Number of cable wires: 2 | Length of cable: 5 | Maximum switching time close (NO): 2 | Bounce duration, maximum: 0.2 | Switching current, maximum: 1 | Note (Switching element): Plug-in reed contact insert |
