Service Hotline
18070781637
Email
18070781637@163.com
Schmersal AES 7112.3 24 VAC (Order No: 101120016) is a genuine safety door switches engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Mounting: Snaps onto standard DIN rail to .....
Glorient offers competitive supply of Schmersal AES 7112.3 24 VAC, Order No: 101120016. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to AES 7112.3 24 VAC, Glorient also supplies:
| Gross weight | 140 g |
| Net weight | 140 g |
| Ambient temperature | +0 ... +55 °C |
| Ambient temperature, maximum | +55 °C |
| Ambient temperature, minimum | 1000078315 °C |
| Standards | EN IEC 60947-5-3 |
| Certificates | cULus |
| Housing material | Glass-fibre reinforced thermoplastic, ventilated |
| EAN (European Article Number) | 4030661058641 |
| Mission time | 20 |
| Mechanical lifetime, minimum | 3,000,000 |
| Thermal test current | 5 A |
| Cable section, maximum | 1.5 mm² |
| Material of the contacts, electrical | AgSn0 |
| Number of safety contacts | 1 |
| Resistance to vibrations | 10...55 Hz, Amplitude 0.35 mm, ± 15 % |
| Storage and transport temperature | -25 ... +70 °C |
| Storage and transport temperature, maximum | +70 °C |
| Storage and transport temperature, minimum | -25 °C |
| Mounting | Snaps onto standard DIN rail to EN 60715 |
| Note (General) | Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit. |
| Degree of pollution | 2 |
| Other Parameters | Current, Utilisation category DC-12: 0.1 | Switching capacity, maximum: 250 | Rated AC voltage for controls, 50 Hz, minimum: 20.4 | Rated AC voltage for controls, 60 Hz, minimum: 20.4 | Overvoltage category: III | ELEC_UTILISAT_CAT_AC15_SROUT_GPV: 250 VAC / 2 A | Note (Wiring diagram): Monitoring 1 guard door(s), each with a magnetic safety sensor of the BNS range | Rated operating voltage: 24 | Drop-out delay in case of emergency, typically: 20 | Current, Utilisation category DC-13: 2 | PFH value: 1.00 x 10⁻⁷ | Integral system diagnostics, status: Yes | Reset after disconnection of supply voltage : Yes | Number of normally open (NO): 4 | Rated control voltage at AC 50 Hz, maximum: 26.4 | Cross-circuit detection: Yes | Restistance to shock: 30 g / 11 ms | Voltage, Utilisation category DC-12: 24 | Contact resistance, maximum: 0.1 | Frequency range: 50 | Pull-in delay at automatic start, maximum, typically: 100 | Conduction resistance, maximum: 40 | Automatic reset function: Yes | Voltage type: AC | Performance Level, up to: d | Number of LEDs: 1 | Switching capacity, minimum: 10 | Rated control voltage at AC 60 Hz, maximum: 26.4 | Category: 3 | Safety Integrity Level (SIL), suitable for applications in: 2 | ELEC_UTILISAT_CAT_DC13_SROUT_GPV: 24 VDC / 2 A | Notice: for max. 50,000 switching cycles/year and max. 80% contact load | Terminal (mechanical): Screw terminals | IP Degree of protection of the installation space: IP54 | Drop-out delay in case of power failure, typically: 80 | Allowed type of cable: solid single-wire | Number of normally closed (NC): 2 | EMC rating: EMC-Directive | IP Degree of protection of clips or terminals: IP20 | Voltage, Utilisation category DC-13: 24 | Wire breakage detection : Yes | Pull-in delay at RESET, typically: 20 | IP Degree of protection of the enclosure: IP40 | Width: 105 | Cable section: 1.5 mm² | Note (Contact resistance): in new state | Voltage, Utilisation category AC-15: 250 | Note (applications): Safety sensor | Depth: 58 | Electrical power consumption: 1.5 | Height: 96 | Stop-Category: 0 | Current, Utilisation category AC-15: 2 | Indicated operating states: Authorised operation | Utilisation category DC-12: 24_0.1 |
