Service Hotline
18070781637
Email
18070781637@163.com
Schmersal AZ 17-02ZI B6R (Order No: 101122856) is a genuine safety door switches engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Mounting: Screws; Ambient temperature: -30 ... ...
Glorient offers competitive supply of Schmersal AZ 17-02ZI B6R, Order No: 101122856. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to AZ 17-02ZI B6R, Glorient also supplies:
| Gross weight | 105 g |
| Net weight | 105 g |
| Ambient temperature | -30 ... +80 °C |
| Ambient temperature, maximum | 1000078431 °C |
| Ambient temperature, minimum | -30 °C |
| Standards | EN IEC 60947-5-1 |
| IP Degree of protection | IP67 |
| Certificates | cULus |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| EAN (European Article Number) | 4030661049755 |
| Mission time | 20 |
| Termination | IDC method of termination |
| Mechanical lifetime, minimum | 1,000,000 |
| Length of sensor | 30 mm |
| Switching element | 2 NC contact |
| Switching principle | slow action, positive break NC contact |
| Width of sensor | 30 mm |
| Thermal test current | 10 A |
| Cable section, maximum | 1 mm² |
| Height of sensor | 85 mm |
| Material of the contacts, electrical | Silver |
| Utilisation category DC-13 | 24 VDC / 4 A |
| Max. fuse rating | 6 A gG D-fuse |
| Utilisation category AC-15 | 230 VAC / 4 A |
| Maximum switching frequency | 2,000 Hz |
| Cable section, minimum | 0.75 mm² |
| Number of safety contacts | 1 / 2 |
| Required rated short-circuit current | 1,000 A |
| Actuating speed, maximum | 2 m/s |
| Note | Torx T10 |
| Number of auxiliary contacts | 1 |
| Traceparts | Yes |
| Storage and transport temperature | -25 ... +85 °C |
| Scope of delivery | Slot cover for dust-proof covering of the opening not in use |
| Storage and transport temperature, maximum | +85 °C |
| Storage and transport temperature, minimum | -30 °C |
| Mounting | Screws |
| Note (General) | This type termination (IDC) method enables simple connetion of flexible conductors without the need for the use of conductor ferrules |
| Degree of pollution | 3 |
| Other Parameters | Number of cable glands: 1 | Overvoltage category: III | Tightening torque of the fastening screws for the housing cover, maximum: 1 | Operating voltage, maximum: 230 | Authorised cable section, minimum: 4 | Authorised cable section, maximum: 8 | Working principle: mechanical | Note (Switching element): galvanically separated contact bridges | Voltage, Utilisation category DC-13: 24 | Latching force: 5 / 30 N | CADENAS: Yes | Type of the fixing screws: 2x M4 | Voltage, Utilisation category AC-15: 230 | Positive break travel: 11 | Material of the actuator: Stainless steel | Cable entry: M16 x 1.5 | Current, Utilisation category AC-15: 4 | Coding level according to EN ISO 14119: High | Please note:: Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. | Positive break force per NC contact, minimum: 17 | Performance Level, up to: c | Category: 3 | Number of actuating directions: 2 | Cable section: 0.75 mm² ... 1 mm² | Current, Utilisation category DC-13: 4 | Permissible installation altitude above sea level, maximum: 2,000 | Tightening torque of the fastening screws for the housing cover, minimum: 0.7 | Positive break force, minimum: 34 | Allowed type of cable: flexible |
