Service Hotline
18070781637
Email
18070781637@163.com
Schmersal AZM 170-02ZRK 110VAC (Order No: 101136321) is a genuine solenoid safety locks engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Mounting: Screws; Ambient temperature: -...
Glorient offers competitive supply of Schmersal AZM 170-02ZRK 110VAC, Order No: 101136321. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to AZM 170-02ZRK 110VAC, Glorient also supplies:
| Gross weight | 305 g |
| Net weight | 305 g |
| Ambient temperature | -25 ... +60 °C |
| Ambient temperature, maximum | 1000078499 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 60947-5-1 |
| IP Degree of protection | IP67 |
| Certificates | cULus |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| EAN (European Article Number) | 4030661056289 |
| Mission time | 20 |
| Mechanical lifetime, minimum | 1,000,000 |
| Length of sensor | 30 mm |
| Switching element | 2 NC contact |
| Switching principle | slow action, positive break NC contact |
| Width of sensor | 90 mm |
| Cable section, maximum | 1 mm² |
| Height of sensor | 84 mm |
| Material of the contacts, electrical | Silver |
| Utilisation category DC-13 | 24 VDC / 4 A |
| Max. fuse rating | 6 A gG D-fuse |
| Utilisation category AC-15 | 230 VAC / 4 A |
| Maximum switching frequency | 1,000 Hz |
| Cable section, minimum | 0.75 mm² |
| Number of safety contacts | 2 |
| Required rated short-circuit current | 1,000 A |
| Actuating speed, maximum | 2 m/s |
| Note | Torx T10 |
| Number of auxiliary contacts | 1 / 2 |
| Traceparts | Yes |
| Storage and transport temperature | -25 ... +85 °C |
| Scope of delivery | Actuator must be ordered separately. |
| Storage and transport temperature, maximum | +85 °C |
| Storage and transport temperature, minimum | -25 °C |
| Mounting | Screws |
| Note (General) | This type termination (IDC) method enables simple connetion of flexible conductors without the need for the use of conductor ferrules |
| Degree of pollution | 3 |
| Protection class | II |
| Other Parameters | Overvoltage category: III | Terminal (mechanical): IDC method of termination | Tightening torque of the fastening screws for the housing cover, maximum: 1 | Test pulse interval, minimum: 50 | Electrical power consumption, maximum: 12 | Power to unlock: Yes | Note (Switching element): Change-over contact with double break, type Zb or 2 NC contacts, with galvanically separated contact bridges | Test pulse duration, maximum: 5 | Wire cross-section, minimum: 20 | Note (Relative humidity): non-condensing | Rated control voltage: 110 | Positive break force per NC contact, minimum: 8.5 | Coding level according to EN ISO 14119: Low | Latching force: 5 / 30 N | Current, Utilisation category DC-13: 2.5 | Cable cross-section of the cable glands, minimum: 4 | Voltage, Utilisation category DC-13: 24 | Working principle: electromechanical | Protection class (Operating resource): 2 | Wire cross-section, maximum: 18 | Magnet switch-on time: 100 | CADENAS: Yes | Type of the fixing screws: 2x M4 | Note (Manual release): bottom | Voltage, Utilisation category AC-15: 230 | Positive break travel: 11 | Allowed type of cable: solid single-wire | Increased latching force: Yes | Cable entry: 1 x M20 x 1,5 | ACE reference article number: 11930420 | Current, Utilisation category AC-15: 4 | Unlocking: Rotating unlatcher | Please note:: Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. | Performance Level, up to: c | Cable cross-section of the cable glands, maximum: 10 | Manual release: Yes | Category: 3 | Number of actuating directions: 2 | Note (applications): removable guard | Positive break force, minimum: 17 | Permissible installation altitude above sea level, maximum: 2,000 | Tightening torque of the fastening screws for the housing cover, minimum: 0.7 |
