Service Hotline
18070781637
Email
18070781637@163.com
Schmersal BNS 260-02Z-R (Order No: 101184369) is a genuine magnetic contactless sensors engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -25 ... +70 °C; Amb...
Glorient offers competitive supply of Schmersal BNS 260-02Z-R, Order No: 101184369. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to BNS 260-02Z-R, Glorient also supplies:
| Gross weight | 52 g |
| Net weight | 52 g |
| Ambient temperature | -25 ... +70 °C |
| Ambient temperature, maximum | +70 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 60947-5-3 |
| IP Degree of protection | IP67 |
| Certificates | cULus |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661321677 |
| Mission time | 20 |
| Termination | cable |
| Length of sensor | 13 mm |
| Switching element | 2 NC contact |
| Width of sensor | 26 mm |
| Height of sensor | 36 mm |
| Number of safety contacts | 2 |
| Actuating element | Magnet |
| Required rated short-circuit current | 100 A |
| Traceparts | Yes |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Storage and transport temperature | -25 ... +70 °C |
| Scope of delivery | Actuator must be ordered separately. |
| Storage and transport temperature, maximum | +70 °C |
| Storage and transport temperature, minimum | -25 °C |
| Note (General) | The contact configuration for versions with or without LED is identical. |
| Other Parameters | Material of the Cable mantle: PVC | Switching capacity, maximum: 10 | ACE reference article number: 11931269 | Switching frequency, maximum: 5 | Coding level according to EN ISO 14119: Low | Switching voltage: without/with LED: max. 75 VDC / max. 24 VDC | Working principle: Magnetic drive | Door hinge: Right | Recommended safety switchgear: SRB-E-301ST | Restistance to shock: 30 g / 11 ms | Number of cable wires: 4 | Recommendation (actuator): BPS 260 | Switching voltage, maximum: 75 | Degree of protection: IP67 | Installation conditions (mechanical): quasi-flush | Wire cross-section: 0.25 | CADENAS: Yes | Note (Wiring diagram): The contacts S11-S12 and S21-S22 must be integrated in the safety circuit. | Note (switching distance): All switching distances in accordance EN IEC 60947-5-3 | Direction of motion: Head-on to the active surface | Length of cable: 1 | Number of normally closed (NC): 2 | Switching current: without/with LED: max. 400 mA / max. 10 mA | Switching capacity: without/with LED: max. 10 VA / max. 240 mW | Switching current, maximum: 0.4 | Coding: Yes |
