Schmersal EX-CSS 8-180-2P+D-M-L-3G/D (Order No: 101189302) is a genuine explosion-proof switches engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -25 ... +4...
Glorient offers competitive supply of Schmersal EX-CSS 8-180-2P+D-M-L-3G/D, Order No: 101189302. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to EX-CSS 8-180-2P+D-M-L-3G/D, Glorient also supplies:
| Gross weight | 135 g |
| Net weight | 135 g |
| Ambient temperature | -25 ... +40 °C |
| Ambient temperature, maximum | +40 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 61508 |
| IP Degree of protection | IP67 |
| Certificates | TÜV, UKCA, ATEX (Konformitätserklärung) |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661347158 |
| Mission time | 20 |
| Termination | cable |
| Length of sensor | 92 mm |
| Utilisation category DC-13 | 24 VDC / 0.5 A |
| Housing construction form | Cylinder, thread |
| Safety functions | Yes |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Storage and transport temperature | -25 ... +85 °C |
| Scope of delivery | Actuator must be ordered separately. |
| Storage and transport temperature, maximum | +85 °C |
| Storage and transport temperature, minimum | -25 °C |
| Degree of pollution | 3 |
| Protection class | II |
| Other Parameters | Terminal connector, Output: 7-pole | Number of fail-safe digital outputs: 2 | PIN 3: A2 GND Blue | Short circuit detection: Yes | Integral system diagnostics, status: Yes | width across flats: 24 | PIN 5: X1 Safety input 1 violet | Operating voltage, maximum: 26.4 | Utilisation category DC-12: 24_0.5 | Cross-circuit detection: Yes | Rated operating voltage: 24 VDC | Voltage, Utilisation category DC-12: 24 | Working principle: inductive | Note (Characteristic curve): Soff: Switch-off distance | Restistance to shock: 30 g / 11 ms | Design of control elements: p-type | Impact energy, maximum: 4 | Material of the nuts: Glass-fibre, reinforced thermoplastic | Protection class (Operating resource): 2 | Explosion protection category: 3G | Wire cross-section: 0.25 | Explosion protection: regulations: EN IEC 60079-0 | Operating voltage: 24 VDC -15 % / +10 % | PFH value: 2.50 x 10⁻⁹ | PIN 2: Y2 Safety output 2 red | Hysteresis (Switching distance), maximum: 0.7 | ISO thread of the sensor: M18 | Length of cable: 2 | Note (switching distance): All switching distances in accordance EN IEC 60947-5-3 | Operating voltage, minimum: 20.4 | Current, Utilisation category DC-12: 0.05 | Note (LED switching conditions display): Multi-coloured LED: Green, Red, Yellow | PIN 1: A1 Ue Brown | Voltage, Utilisation category DC-13: 24 | Sensor topology: Sensor for series wiring | Scope of delivery of mounting material: 2x nuts M18 x 1 | Installation conditions (mechanical): not flush | Current, Utilisation category DC-13: 0.05 | PIN 7: Signalling output Grey | Category: 4 | Recommendation (actuator): CST 180-2 | Operating current: 1,000 | TOL_VOLT_OPERAT_DC_MAX: 10 | Tightening torque of nuts, maximum: 3 | Switching frequency, approx.: 3 | PIN 6: X2 Safety input 2 White | TOL_VOLT_OPERAT_DC_MIN: -15 | Safety Integrity Level (SIL), suitable for applications in: 3 | Number of cable wires: 7 | Number of semi-conductor outputs with signaling function: 1 | Active area: Glass-fibre, reinforced thermoplastic | Duration of risk, maximum: 30 | Voltage type: DC | Number of series-wiring of sensors: 16 | Repeat accuracy R: 0.2 | Manufacturer declaration: ATEX Zone 2 and 22 | PIN 4: Y1 Safety output 1 Black | Absicherung des Sicherheitsausganges: short-circuit proof, p-type | Overvoltage category: 3 | Explosion protection zones: 22 | Traceparts, product ID: 33-22052019-077908 | Electrical fuse rating: short-circuit proof, p-type | Switch distance, typical: 8 | Reaction time, maximum: 30 | Performance Level, up to: e |