Service Hotline
18070781637
Email
18070781637@163.com
Schmersal BNS 36-02/01Z-ST-R (Order No: 101190024) is a genuine magnetic contactless sensors engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -25 ... +70 °C...
Glorient offers competitive supply of Schmersal BNS 36-02/01Z-ST-R, Order No: 101190024. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to BNS 36-02/01Z-ST-R, Glorient also supplies:
| Gross weight | 29 g |
| Net weight | 29 g |
| Ambient temperature | -25 ... +70 °C |
| Ambient temperature, maximum | +70 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 60947-5-3 |
| IP Degree of protection | IP67 |
| Certificates | cULus |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661361543 |
| Mission time | 20 |
| Termination | Connector 8 mm, 6-pole, Latching interlocking |
| Length of sensor | 13 mm |
| Switching element | 3 NC contact |
| Width of sensor | 88 mm |
| Height of sensor | 25 mm |
| Number of safety contacts | 2 |
| Actuating element | Magnet |
| Traceparts | Yes |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Storage and transport temperature | -25 ... +70 °C |
| Scope of delivery | Actuator must be ordered separately. |
| Storage and transport temperature, maximum | +70 °C |
| Storage and transport temperature, minimum | -25 °C |
| Note (General) | The number in brackets indicate the PIN number of the connector. |
| Other Parameters | Recommendation (actuator): BPS 36-2 | Switching frequency, maximum: 5 | Coding level according to EN ISO 14119: Low | Working principle: Magnetic drive | Door hinge: Right | Recommended safety switchgear: SRB-E-301ST | Restistance to shock: 30 g / 11 ms | Number of normally closed (NC): 3 | Installation conditions (mechanical): quasi-flush | CADENAS: Yes | Note (switching distance): All switching distances in accordance EN IEC 60947-5-3 | Direction of motion: Head-on to the active surface | Switching capacity, maximum: 10 | Switching voltage, maximum: 30 | Switching current, maximum: 0.4 | Coding: Yes |
