Service Hotline
18070781637
Email
18070781637@163.com
Schmersal CSS 8-180-2P-E-L 10,0M (Order No: 101195510) is a genuine safety door switches engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -25 ... +60 °C; Am...
Glorient offers competitive supply of Schmersal CSS 8-180-2P-E-L 10,0M, Order No: 101195510. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to CSS 8-180-2P-E-L 10,0M, Glorient also supplies:
| Gross weight | 575 g |
| Net weight | 575 g |
| Ambient temperature | -25 ... +60 °C |
| Ambient temperature, maximum | 1000078659 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 60947-5-3 |
| IP Degree of protection | IP67 |
| Certificates | UKCA |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661361246 |
| Mission time | 20 |
| Termination | cable |
| Length of sensor | 92 mm |
| Utilisation category DC-13 | 24 VDC / 0.5 A |
| Housing construction form | Cylinder, thread |
| Safety functions | Yes |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Storage and transport temperature | -25 ... +85 °C |
| Scope of delivery | Actuator must be ordered separately. |
| Storage and transport temperature, maximum | +85 °C |
| Storage and transport temperature, minimum | -25 °C |
| Degree of pollution | 3 |
| Protection class | II |
| Other Parameters | Number of fail-safe digital outputs: 2 | PIN 2: Y2 safety output 2: White | PIN 3: A2 GND Blue | Short circuit detection: Yes | Integral system diagnostics, status: Yes | width across flats: 24 | Terminal connector, Output: 4-pole | Operating voltage, maximum: 26.4 | Utilisation category DC-12: 24_0.5 | Cross-circuit detection: Yes | Rated operating voltage: 24 VDC | Recommended safety switchgear: SRB-E-301ST | Working principle: inductive | Note (Characteristic curve): Soff: Switch-off distance | Restistance to shock: 30 g / 11 ms | Material of the nuts: Glass-fibre, reinforced thermoplastic | Output current, (fail-safe output), maximum: 0.5 | Design of control elements: p-type | Protection class (Operating resource): 2 | Operating voltage: 24 VDC -15 % / +10 % | Absicherung des Sicherheitsausganges: short-circuit proof | Hysteresis (Switching distance), maximum: 0.7 | ISO thread of the sensor: M18 | Note (switching distance): All switching distances in accordance EN IEC 60947-5-3 | Operating voltage, minimum: 20.4 | Note (LED switching conditions display): Multi-coloured LED: Green, Red, Yellow | Voltage, Utilisation category DC-12: 24 | PIN 1: A1 Ue Brown | Voltage, Utilisation category DC-13: 24 | Scope of delivery of mounting material: 2x nuts M18 x 1 | Installation conditions (mechanical): not flush | Rated operating current (safety outputs): 500 | Category: 4 | Recommendation (actuator): CST 180-2 | Operating current: 1,000 | TOL_VOLT_OPERAT_DC_MAX: 10 | Tightening torque of nuts, maximum: 3 | PFH value: 3.57 x 10⁻⁹ | Switching frequency, approx.: 3 | TOL_VOLT_OPERAT_DC_MIN: -15 | Safety Integrity Level (SIL), suitable for applications in: 3 | Sensor topology: Individual sensor or end sensor in a series | Active area: Glass-fibre, reinforced thermoplastic | Length of cable: 10 | Duration of risk, maximum: 30 | Voltage type: DC | Number of series-wiring of sensors: 16 | Repeat accuracy R: 0.2 | Wire cross-section: 0.5 | Current, Utilisation category DC-13: 0.5 | Absicherung des Diagnoseausganges: short-circuit proof | PIN 4: Y1 Safety output 1 Black | Overvoltage category: 3 | Switch distance, typical: 8 | Reaction time, maximum: 30 | Current, Utilisation category DC-12: 0.5 | Performance Level, up to: e |
