Service Hotline
18070781637
Email
18070781637@163.com
Schmersal BNS 40S-12Z (Order No: 101215517) is a genuine magnetic contactless sensors engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -25 ... +80 °C; Ambie...
Glorient offers competitive supply of Schmersal BNS 40S-12Z, Order No: 101215517. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to BNS 40S-12Z, Glorient also supplies:
| Gross weight | 250 g |
| Net weight | 250 g |
| Ambient temperature | -25 ... +80 °C |
| Ambient temperature, maximum | +80 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 60947-5-3 |
| IP Degree of protection | IP69 |
| Certificates | cULus |
| Housing material | Stainless steel (V4A) |
| EAN (European Article Number) | 4030661419275 |
| Mission time | 20 |
| Termination | cable |
| Length of sensor | 14 mm |
| Switching element | 1 NO contact, 2 NC contacts |
| Switching principle | Reed contacts, Non-contact principle |
| Width of sensor | 88 mm |
| Height of sensor | 27 mm |
| Actuating element | Magnet |
| Traceparts | Yes |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Storage and transport temperature | -25 ... +80 °C |
| Scope of delivery | Actuator must be ordered separately. |
| Storage and transport temperature, maximum | +80 °C |
| Storage and transport temperature, minimum | -25 °C |
| Note (General) | The contact configuration for versions with or without LED is identical. |
| Other Parameters | Note (Wiring diagram): Contact S21-S22 must be integrated in the safety circuit. | Material of the Cable mantle: PVC | Recommendation (actuator): BPS 40S-1 | Number of cable wires: 6 | Switching frequency, maximum: 5 | Coding level according to EN ISO 14119: Low | Working principle: Magnetic drive | Recommended safety switchgear: SRB-E-301ST | Restistance to shock: 30 g / 11 ms | Cable type: LiYY | Number of normally open (NO): 1 | Wire cross-section: 0.25 | Note (switching distance): All switching distances in accordance EN IEC 60947-5-3 | Installation conditions (mechanical): not flush | Direction of motion: Head-on to the active surface | Length of cable: 1 | Number of normally closed (NC): 2 | Switching current, maximum: 0.25 | Concealed, threaded holes on the back : No | Switching voltage, maximum: 100 | Active area: lateral | Coding: Yes | Switching capacity, maximum: 3 | Prerequisite evaluation unit: Yes |
