Service Hotline
18070781637
Email
18070781637@163.com
Schmersal BNS 303-02Z-2211 2,5M (Order No: 103000418) is a genuine magnetic contactless sensors engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -25 ... +70...
Glorient offers competitive supply of Schmersal BNS 303-02Z-2211 2,5M, Order No: 103000418. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to BNS 303-02Z-2211 2,5M, Glorient also supplies:
| Gross weight | 127 g |
| Net weight | 127 g |
| Ambient temperature | -25 ... +70 °C |
| Ambient temperature, maximum | +70 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 60947-5-3 |
| IP Degree of protection | IP67 |
| Certificates | cULus |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661420691 |
| Mission time | 20 |
| Termination | cable |
| Length of sensor | 44 mm |
| Switching element | 2 NC contact |
| Switching principle | Reed contacts, Non-contact principle |
| Number of safety contacts | 2 |
| Actuating element | Magnet |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Storage and transport temperature | -25 ... +70 °C |
| Scope of delivery | Actuator must be ordered separately. |
| Storage and transport temperature, maximum | +70 °C |
| Storage and transport temperature, minimum | -25 °C |
| Note (General) | The contact configuration for versions with or without LED is identical. |
| Other Parameters | Recommendation (actuator): BPS 303 | Material of the Cable mantle: PVC | Material of the nuts: Thermoplastic | Recommended safety switchgear: SRB 301ST | Switching frequency, maximum: 5 | Coding level according to EN ISO 14119: Low | Working principle: Magnetic drive | ISO thread of the sensor: M30 | Restistance to shock: 30 g / 11 ms | Number of cable wires: 4 | Installation conditions (mechanical): quasi-flush | Wire cross-section: 0.25 | width across flats: 36 | Note (switching distance): All switching distances in accordance EN IEC 60947-5-3 | Scope of delivery of mounting material: 2x Mounting material M30 x 1.5 nuts | Direction of motion: Head-on to the active surface | Number of normally closed (NC): 2 | Tightening torque of nuts, maximum: 3 | Length of cable: 2.5 | Switching capacity, maximum: 10 | Switching voltage, maximum: 100 | Switching current, maximum: 0.4 | Coding: Yes |
