Service Hotline
18070781637
Email
18070781637@163.com
Schmersal BN 650-10Z/V 3,0M (Order No: 103000634) is a genuine safety door switches engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Mounting: central with threated flange; Ambi...
Glorient offers competitive supply of Schmersal BN 650-10Z/V 3,0M, Order No: 103000634. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to BN 650-10Z/V 3,0M, Glorient also supplies:
| Gross weight | 167 g |
| Net weight | 167 g |
| Ambient temperature | -25 ... +70 °C |
| Ambient temperature, maximum | 1000078571 °C |
| Ambient temperature, minimum | -25 °C |
| IP Degree of protection | IP67 |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661420912 |
| Termination | Pre-wired cable |
| Mechanical lifetime, minimum | 100,000,000 |
| Length of sensor | 103 mm |
| Switching element | Normally open contact (NO) |
| Switching principle | Reed contacts, Non-contact principle |
| Maximum switching frequency | 1,080,000 Hz |
| Actuating element | Magnet |
| Actuating speed, maximum | 18 m/s |
| Housing construction form | Cylinder smooth |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Scope of delivery | Actuator must be ordered separately. |
| Mounting | central with threated flange |
| Note (General) | This does not apply to the bistable contact. |
| Other Parameters | Switching voltage, maximum: 200 | Material of the Cable mantle: PVC | Recommendation (actuator): 2x BP 10 S | width across flats: 22 | Cable sleeve: Yes | Repeat accuracy R: 0.3 | Working principle: Magnetic drive | Note (switching distance): All switching distances in accordance EN IEC 60947-5-2 | Recommendation (actuator, lift switchgear): BP 10 | Restistance to shock: 30 g / 11 ms | Diameter of sensor: 13 | Cable type: LiYY | Switching capacity, maximum: 30 | Number of normally open (NO): 1 | Wire cross-section: 0.25 | Active area: front side | Suitable for elevators: Yes | Switching frequency, maximum: 300 | Number of cable wires: 2 | Tightening torque of nuts, maximum: 3 | Bounce duration, maximum: 0.2 | Cable entry: PG9 | Switching current, maximum: 1 | bias magnet : Yes | Length of cable: 3 |
