Service Hotline
18070781637
Email
18070781637@163.com
Schmersal IFL 4-120-10 (Order No: 101141523) is a genuine safety inductive sensors engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -25 ... +70 °C; Ambient ...
Glorient offers competitive supply of Schmersal IFL 4-120-10, Order No: 101141523. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to IFL 4-120-10, Glorient also supplies:
| Gross weight | 80 g |
| Net weight | 80 g |
| Ambient temperature | -25 ... +70 °C |
| Ambient temperature, maximum | 1000078861 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | DIN VDE 0660-208, EN IEC 60947-5-2 |
| IP Degree of protection | IP67 |
| Certificates | CCC |
| Housing material | Plastic |
| EAN (European Article Number) | 4030661122250 |
| Termination | Cable H03VV-F |
| Length of sensor | 71 mm |
| Switching element | Normally open contact (NO) |
| Housing construction form | Cylinder, thread |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Note (General) | An H12 clamp can also be supplied instead of the nuts. |
| Protection class | II |
| Other Parameters | Operating voltage, maximum: 250 | Material of the Cable mantle: PVC | Rated supply frequency, maximum: 65 | Integral system diagnostics, status: Yes | Switching frequency, approx.: 10 | ACE reference article number: 171606 | Note (switching distance): All switching distances in accordance EN IEC 60947-5-2 | Restistance to shock: 30 g / 11 ms | Operating voltage, minimum: 15 | Type of voltage range: AC | VOLT_RATED_OPERAT_RANGE_AC_MIN: 15 | Protection class (Operating resource): 2 | Cable sleeve: No | Length of cable: 2 | Number of cable wires: 2 | Installation conditions (mechanical): not flush | Rated operating voltage: 15 ... 250 VAC | Material of the nuts: Plastic | Operating voltage: 15 ... 250 VAC | Rated supply frequency, minimum: 45 | Protection circuit integrated: inductive interference protection | Design of control elements: Two-wire | Note (Integral System Diagnostics, status ): yellow LED | width across flats: 17 | Material of the washer: Perbunan | Operating current, minimum: 8 | Wire cross-section: 0.5 | Tightening torque of nuts, maximum: 0.9 | Active area: Plastic | VOLT_RATED_OPERAT_RANGE_AC_MAX: 250 | ISO thread of the sensor: M12 | Operating current: 200 |
