Service Hotline
18070781637
Email
18070781637@163.com
Schmersal BNS 300-01ZG-2211 4,0M (Order No: 101155150) is a genuine magnetic contactless sensors engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -25 ... +5...
Glorient offers competitive supply of Schmersal BNS 300-01ZG-2211 4,0M, Order No: 101155150. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to BNS 300-01ZG-2211 4,0M, Glorient also supplies:
| Gross weight | 318 g |
| Net weight | 318 g |
| Ambient temperature | -25 ... +55 °C |
| Ambient temperature, maximum | +55 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 60947-5-3 |
| IP Degree of protection | IP67 |
| Certificates | cULus |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661175522 |
| Mission time | 20 |
| Termination | cable |
| Length of sensor | 78 mm |
| Switching element | 1 NC contact |
| Utilisation category DC-13 | 24 VDC / 0.03 A |
| Number of safety contacts | 1 |
| Actuating element | Magnet |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Storage and transport temperature | -25 ... +70 °C |
| Scope of delivery | Actuator must be ordered separately. |
| Storage and transport temperature, maximum | +70 °C |
| Storage and transport temperature, minimum | -25 °C |
| Note (General) | Contact symbols shown for the closed condition of the guard device. |
| Other Parameters | Recommendation (actuator): BPS 303 | Traceparts, product ID: 33-22052019-077541 | Note (Integral System Diagnostics, status ): The LED is illuminated when the guard is closed. | Material of the Cable mantle: PVC | Material of the nuts: Thermoplastic | Switching voltage, maximum: 250 | Switching frequency, maximum: 5 | Integral system diagnostics, status: Yes | Coding level according to EN ISO 14119: Low | Working principle: Magnetic drive | Time to readiness, maximum: 50 | Recommended safety switchgear: SRB-E-301ST | Wire cross-section: 18 | ISO thread of the sensor: M30 | Restistance to shock: 30 g / 11 ms | Number of cable wires: 4 | Length of cable: 4 | Installation conditions (mechanical): quasi-flush | width across flats: 36 | CADENAS: Yes | Note (switching distance): All switching distances in accordance EN IEC 60947-5-3 | Duration of risk, maximum: 50 | Number of normally closed (NC): 1 | Current, Utilisation category DC-13: 0.03 | Scope of delivery of mounting material: 2x nuts M30 x 1.5 | Direction of motion: Head-on to the active surface | Switching current, maximum: 3 | Tightening torque of nuts, maximum: 3 | Safety monitoring module integrated: Yes | Rated operating voltage: 24 | Switching capacity, maximum: 750 | Coding: Yes | Voltage, Utilisation category DC-13: 24 |
