Service Hotline
18070781637
Email
18070781637@163.com
Schmersal BN 325-RG-1279/2704 5,0M (Order No: 101210789) is a genuine safety door switches engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Mounting: rear with 2 threaded bolts ...
Glorient offers competitive supply of Schmersal BN 325-RG-1279/2704 5,0M, Order No: 101210789. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to BN 325-RG-1279/2704 5,0M, Glorient also supplies:
| Gross weight | 235 g |
| Net weight | 235 g |
| Ambient temperature | -25 ... +70 °C |
| Ambient temperature, maximum | +70 °C |
| Ambient temperature, minimum | -25 °C |
| IP Degree of protection | IP67 |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661387710 |
| Termination | Pre-wired cable |
| Mechanical lifetime, minimum | 1,000,000,000 |
| Length of sensor | 24 mm |
| Switching principle | Latching |
| Width of sensor | 85 mm |
| Height of sensor | 26 mm |
| Maximum switching frequency | 1,080,000 Hz |
| Actuating element | Magnet |
| Actuating speed, maximum | 18 m/s |
| Note | Integrated shielding plate (top and bottom) |
| Housing construction form | Block |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Scope of delivery | Actuator must be ordered separately. |
| Mounting | rear with 2 threaded bolts M4 |
| Note (General) | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. |
| Other Parameters | Material of the Cable mantle: PVC | Recommendation (actuator): 2x BP 10 S | Switching voltage, maximum: 250 | Cable sleeve: Yes | Repeat accuracy R: 0.3 | Integral system diagnostics, status: Yes | Wire cross-section: 22 | Working principle: Magnetic drive | Note (switching distance): All switching distances in accordance EN IEC 60947-5-2 | Number of snap-in contacts: 1 | Recommendation (actuator, lift switchgear): BP 10 | Number of cable wires: 3 | Cable entry: back, right | Bounce duration, minimum: 0.3 | Cable type: LiYY | Scope of delivery of mounting material: 2x fastening material locking nuts M4 | Latching: Yes | Restistance to shock: 50 g / 11 ms | Switching capacity, maximum: 120 | Actuation direction: Lengthwise | Active area: front side | Suitable for elevators: Yes | Switching frequency, maximum: 300 | Length of cable: 5 | Switching current, maximum: 3 | Resistant to vibration: 30 g, on sine wave oscillation | Bounce duration, maximum: 0.6 | Maximum switching time open (NC): 0.5 | Note (Switching distance Sn): Actuating distance up to 55 mm depending on version and actuating magnet | Maximum switching time close (NO): 1.5 |
