Service Hotline
18070781637
Email
18070781637@163.com
Schmersal BNS 16-11ZV-ST1-2505-1 (Order No: 101179898) is a genuine magnetic contactless sensors engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -25 ... +7...
Glorient offers competitive supply of Schmersal BNS 16-11ZV-ST1-2505-1, Order No: 101179898. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to BNS 16-11ZV-ST1-2505-1, Glorient also supplies:
| Gross weight | 115 g |
| Net weight | 115 g |
| Ambient temperature | -25 ... +70 °C |
| Ambient temperature, maximum | +70 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 60947-5-3 |
| IP Degree of protection | IP67 |
| Certificates | cULus |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661313290 |
| Mission time | 20 |
| Termination | Connector M12 |
| Length of sensor | 39.5 mm |
| Switching element | 1 NO contact, 1 NC contacts |
| Switching principle | Reed contacts, Non-contact principle |
| Width of sensor | 55 mm |
| Height of sensor | 107 mm |
| Actuating element | Magnet |
| Resistance to vibrations | 10 … 55 Hz, amplitude 1 mm |
| Storage and transport temperature | -25 ... +70 °C |
| Scope of delivery | Actuator must be ordered separately. |
| Storage and transport temperature, maximum | +70 °C |
| Storage and transport temperature, minimum | -25 °C |
| Note (General) | Contact symbols shown for the closed condition of the guard device. |
| Other Parameters | Recommendation (actuator): BPS 16 | Switching frequency, maximum: 5 | Coding level according to EN ISO 14119: Low | Working principle: Magnetic drive | Recommended safety switchgear: SRB-E-301ST | Restistance to shock: 30 g / 11 ms | Number of normally open (NO): 1 | Note (switching distance): All switching distances in accordance EN IEC 60947-5-3 | Number of normally closed (NC): 1 | Active area: front side | Installation conditions (mechanical): not flush | Connector position : Centre | Direction of motion: Head-on to the active surface | Switching capacity, maximum: 10 | Switching voltage, maximum: 100 | Switching current, maximum: 0.4 | Coding: Yes | Prerequisite evaluation unit: Yes |
