Service Hotline
18070781637
Email
18070781637@163.com
Schmersal MZM 100 ST-AS REAP (Order No: 101198704) is a genuine safety door switches engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Ambient temperature: -25 ... +55 °C; Ambien...
Glorient offers competitive supply of Schmersal MZM 100 ST-AS REAP, Order No: 101198704. Competitive pricing, fast quotation.
Schmersal MZM 100 ST-AS REAP - industrial safety component from Schmersal, the global leader in safety switchgear.
The Schmersal MZM 100 ST-AS REAP is designed for reliable machine safety performance and long service life in demanding industrial environments.
Schmersal is a global leader in industrial safety switchgear and automation solutions. Founded in 1945 in Wuppertal, Germany, Schmersal develops and manufactures safety switches, sensors, and systems for machine and plant engineering worldwide. Glorient is a professional supplier of genuine Schmersal products with competitive pricing and fast worldwide delivery.
| Gross weight | 602 g |
| Net weight | 602 g |
| Ambient temperature | -25 ... +55 °C |
| Ambient temperature, maximum | +55 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 60947-5-3 |
| IP Degree of protection | IP67 |
| Certificates | cULus, ASi-SaW |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661370774 |
| Mission time | 20 |
| Termination | Connector plug M12, 4-pole, (A-coding) |
| Mechanical lifetime, minimum | 1,000,000 |
| Length of sensor | 40 mm |
| Width of sensor | 40 mm |
| Height of sensor | 179 mm |
| Traceparts | Yes |
| Safety functions | Yes |
| Resistance to vibrations | 10 … 150 Hz, amplitude 0.35 mm |
| Storage and transport temperature | -25 ... +85 °C |
| Scope of delivery | Actuator must be ordered separately. |
| Storage and transport temperature, maximum | +85 °C |
| Storage and transport temperature, minimum | -25 °C |
| Degree of pollution | 3 |
| Protection class | III |
| Other Parameters | Reaction time, maximum: 150 | AS-i Outputs, DO 0: Solenoid control | AS-i Parameter bits, P3: Device error (fault detected) | Note (LED switching conditions display): (2) LED yellow: Device condition | Holding force, typically: 750 | FORCE_LATCH_GPV: 30 ... 100 N | Note (Mechanical lifetime): Actuating speed ≤ 0.5 m/s | Note (Relative humidity): non-condensing | Traceparts, product ID: 69-05102007-016632 | EPLAN: Yes | Fuse rating: 4 | Relative humidity: 30 ... 95 % | NOTE_VOLT_RATED_OPERAT_ASI: Protection against polarity reversal | Integral system diagnostics, status: Yes | Recommendation (actuator): MZM 100-B1.1 | Coding level according to EN ISO 14119: Low | AS-i Input module address: 0 | Rated operating voltage: 24 VDC -15% / +10% (stabilised PELV) | Note (AS-i Operating voltage): Protection against polarity reversal | AS-i, ID-Code1: 0xF | AS-i Profile : S-7.B.F.E | Working principle: inductive | Restistance to shock: 30 g / 11 ms | Note (AS-i Input module address): Preset to address 0, can be changed through AS-interface bus master or hand-held programming device | Power to lock: Yes | AS-i Specification: Safety-Slave | Note (AS-i Parameter bits): FID: periphery error | AS-i Operating voltage, minimum: 26.5 | Operating voltage: 24 VDC -15 % / +10 % (stabilised PELV power supply) | Note voltage AUX DC: stabilised PELV power supply | Coding: Universal coding | Latching: Yes | Magnet switch-on time: 100 | AS-i, ID-Code2: 0xE | PIN 4: Aux + (P) | VOLT_RATED_OPERAT_ASI_DC_MIN: 26.5 | PIN 2: Aux - (P) | Duration of risk, maximum: 150 | VOLT_TYPE_AUX: DC | AS-i Input, Channel 2: Data bits DI 2 / DI 3 = dynamic code transmission | Time to readiness, maximum: 4,000 | PIN 3: AS-Interface - | PFH value: 5.00 x 10⁻⁹ | Category: 4 | Holding force, guaranteed: 500 | TOL_VOLT_OPERAT_AUX_DC_MAX: 10 | AS-i Parameter bits, P0: Actuator in | AS-i Version : V 2.1 | Latching force, minimum: 30 | Latching force, maximum: 100 | Relative humidity, minimum: 30 | Relative humidity, maximum: 95 | AS-i Input, Channel 1: Data bits DI 0 / DI 1 = dynamic code transmission | TOL_VOLT_OPERAT_AUX_DC_MIN: -15 | Current consumption: 600 | AS-i Parameter bits, P1: Solenoid interlock locked | Safety Integrity Level (SIL), suitable for applications in: 3 | AS-i Outputs, DO 1: For the variable setting of the latching force | AS-i Parameter bits, P2: Auxiliary voltage in | AS-i Device protection: Internal short-circuit proof | AS-i Current consumption, maximum: 100 | PIN 1: AS-i + | AS-i, ID-Code: 0xB | Solenoid interlock monitored: Yes | AS-i Outputs, DO 3: For the variable setting of the latching force | VOLT_TYPE_ASI: DC | AS-i, IO-Code: 0x7 | Overvoltage category: 3 | AS-i Outputs, DO 2: For the variable setting of the latching force | Protection class (Operating resource): 3 | VOLT_RATED_OPERAT_ASI_DC_MAX: 31.6 | AS-i Operating voltage AS-i maximum: 31.6 | Performance Level, up to: e |
In addition to MZM 100 ST-AS REAP, Glorient also supplies:
| Gross weight | 602 g |
| Net weight | 602 g |
| Ambient temperature | -25 ... +55 °C |
| Ambient temperature, maximum | +55 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 60947-5-3 |
| IP Degree of protection | IP67 |
| Certificates | cULus, ASi-SaW |
| Housing material | Glass-fibre, reinforced thermoplastic |
| EAN (European Article Number) | 4030661370774 |
| Mission time | 20 |
| Termination | Connector plug M12, 4-pole, (A-coding) |
| Mechanical lifetime, minimum | 1,000,000 |
| Length of sensor | 40 mm |
| Width of sensor | 40 mm |
| Height of sensor | 179 mm |
| Traceparts | Yes |
| Safety functions | Yes |
| Resistance to vibrations | 10 … 150 Hz, amplitude 0.35 mm |
| Storage and transport temperature | -25 ... +85 °C |
| Scope of delivery | Actuator must be ordered separately. |
| Storage and transport temperature, maximum | +85 °C |
| Storage and transport temperature, minimum | -25 °C |
| Degree of pollution | 3 |
| Protection class | III |
| Other Parameters | Reaction time, maximum: 150 | AS-i Outputs, DO 0: Solenoid control | AS-i Parameter bits, P3: Device error (fault detected) | Note (LED switching conditions display): (2) LED yellow: Device condition | Holding force, typically: 750 | FORCE_LATCH_GPV: 30 ... 100 N | Note (Mechanical lifetime): Actuating speed ≤ 0.5 m/s | Note (Relative humidity): non-condensing | Traceparts, product ID: 69-05102007-016632 | EPLAN: Yes | Fuse rating: 4 | Relative humidity: 30 ... 95 % | NOTE_VOLT_RATED_OPERAT_ASI: Protection against polarity reversal | Integral system diagnostics, status: Yes | Recommendation (actuator): MZM 100-B1.1 | Coding level according to EN ISO 14119: Low | AS-i Input module address: 0 | Rated operating voltage: 24 VDC -15% / +10% (stabilised PELV) | Note (AS-i Operating voltage): Protection against polarity reversal | AS-i, ID-Code1: 0xF | AS-i Profile : S-7.B.F.E | Working principle: inductive | Restistance to shock: 30 g / 11 ms | Note (AS-i Input module address): Preset to address 0, can be changed through AS-interface bus master or hand-held programming device | Power to lock: Yes | AS-i Specification: Safety-Slave | Note (AS-i Parameter bits): FID: periphery error | AS-i Operating voltage, minimum: 26.5 | Operating voltage: 24 VDC -15 % / +10 % (stabilised PELV power supply) | Note voltage AUX DC: stabilised PELV power supply | Coding: Universal coding | Latching: Yes | Magnet switch-on time: 100 | AS-i, ID-Code2: 0xE | PIN 4: Aux + (P) | VOLT_RATED_OPERAT_ASI_DC_MIN: 26.5 | PIN 2: Aux - (P) | Duration of risk, maximum: 150 | VOLT_TYPE_AUX: DC | AS-i Input, Channel 2: Data bits DI 2 / DI 3 = dynamic code transmission | Time to readiness, maximum: 4,000 | PIN 3: AS-Interface - | PFH value: 5.00 x 10⁻⁹ | Category: 4 | Holding force, guaranteed: 500 | TOL_VOLT_OPERAT_AUX_DC_MAX: 10 | AS-i Parameter bits, P0: Actuator in | AS-i Version : V 2.1 | Latching force, minimum: 30 | Latching force, maximum: 100 | Relative humidity, minimum: 30 | Relative humidity, maximum: 95 | AS-i Input, Channel 1: Data bits DI 0 / DI 1 = dynamic code transmission | TOL_VOLT_OPERAT_AUX_DC_MIN: -15 | Current consumption: 600 | AS-i Parameter bits, P1: Solenoid interlock locked | Safety Integrity Level (SIL), suitable for applications in: 3 | AS-i Outputs, DO 1: For the variable setting of the latching force | AS-i Parameter bits, P2: Auxiliary voltage in | AS-i Device protection: Internal short-circuit proof | AS-i Current consumption, maximum: 100 | PIN 1: AS-i + | AS-i, ID-Code: 0xB | Solenoid interlock monitored: Yes | AS-i Outputs, DO 3: For the variable setting of the latching force | VOLT_TYPE_ASI: DC | AS-i, IO-Code: 0x7 | Overvoltage category: 3 | AS-i Outputs, DO 2: For the variable setting of the latching force | Protection class (Operating resource): 3 | VOLT_RATED_OPERAT_ASI_DC_MAX: 31.6 | AS-i Operating voltage AS-i maximum: 31.6 | Performance Level, up to: e |
