Service Hotline
18070781637
Email
18070781637@163.com
Schmersal AZM150SK-11/11RA-024 (Order No: 153041742) is a genuine solenoid safety locks engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Mounting: Screws; Ambient temperature: -...
Glorient offers competitive supply of Schmersal AZM150SK-11/11RA-024, Order No: 153041742. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to AZM150SK-11/11RA-024, Glorient also supplies:
| Gross weight | 593 g |
| Net weight | 593 g |
| Ambient temperature | -25 ... +55 °C |
| Ambient temperature, maximum | +55 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 60947-5-1 |
| IP Degree of protection | IP67 |
| Certificates | cULus |
| Housing material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Mission time | 20 |
| Mechanical lifetime, minimum | 1,000,000 |
| Length of sensor | 48 mm |
| Switching element | Magnet: 1 NO Contact, 1 NC contact / Actuator: 1 NO contact, 1 NC contact |
| Switching principle | slow action, positive break NC contact |
| Width of sensor | 40 mm |
| Thermal test current | 5 A |
| Cable section, maximum | 1.5 mm² |
| Height of sensor | 204 mm |
| Material of the contacts, electrical | Silver |
| Utilisation category DC-13 | 24 VDC / 4 A |
| Max. fuse rating | 6 A gG D-fuse to DIN EN 60269-1 |
| Maximum switching frequency | 1,000 Hz |
| Cable section, minimum | 0.25 mm² |
| Number of safety contacts | 2 / 3 / 4 |
| Required rated short-circuit current | 1,000 A |
| Actuating speed, maximum | 0.3 m/s |
| Note | Torx T10 |
| Number of auxiliary contacts | 1 / 2 |
| Traceparts | Yes |
| Storage and transport temperature | -40 ... +85 °C |
| Scope of delivery | Slot cover for dust-proof covering of the opening not in use |
| Storage and transport temperature, maximum | +85 °C |
| Storage and transport temperature, minimum | -40 °C |
| Mounting | Screws |
| Degree of pollution | 2 |
| Protection class | II |
| Other Parameters | Voltage, Utilisation category DC-13: 24 | Voltage, Utilisation category AC-15: 230 | Tightening torque of the fastening screws for the housing cover: 0.5 | Test pulse interval, minimum: 50 | Rated control voltage: 24 | Type of the fixing screws: 4x M5 | Test pulse duration, maximum: 5 | Note (Relative humidity): non-condensing | EPLAN: Yes | Note (Manual release): using triangular key | Coding level according to EN ISO 14119: Low | Tightening torque of electrical connection, minimum: 0.6 | Tightening torque of the fixing screws: 1.3 ... 1.5 Nm | Tightening torque of the fixing screws, maximum: 1.5 | Electrical power consumption, maximum: 8.5 | Power to lock: Yes | Working principle: electromechanical | Relative humidity, maximum: 93 | Protection class (Operating resource): 2 | Magnet switch-on time: 100 | Cable entry: 3 x M20 x 1,5 | CADENAS: Yes | Current, Utilisation category DC-13: 4 | Property class: 8.8 | Terminal (mechanical): Screw terminals | Positive break travel: 5 | Note (Mechanical lifetime): from device version V2 (see type plate) | Allowed type of cable: solid single-wire | Current, Utilisation category AC-15: 4 | Please note:: Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. | Latching force, approx.: 50 | Performance Level, up to: c | Manual release: Yes | Tightening torque of electrical connection, maximum: 0.8 | Overvoltage category: II | Category: 3 | Number of actuating directions: 2 | Note (applications): removable guard | Tightening torque of the fixing screws, minimum: 1.3 | Positive break force per NC contact, minimum: 10 | Material of the latching bolt: Stainless steel (1.4104) | Note (Switching element): with double break |
