Service Hotline
18070781637
Email
18070781637@163.com
Schmersal SRB303SQP-SS-230V (Order No: 103008088) is a genuine safety relays engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Mounting: Snaps onto standard DIN rail to ...; Ambi...
Glorient offers competitive supply of Schmersal SRB303SQP-SS-230V, Order No: 103008088. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to SRB303SQP-SS-230V, Glorient also supplies:
| Gross weight | 480 g |
| Net weight | 480 g |
| Ambient temperature | -25 ... +70 °C |
| Ambient temperature, maximum | 1000637605 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 60947-5-3 |
| Certificates | cULus |
| Housing material | Glass-fibre reinforced thermoplastic, ventilated |
| EAN (European Article Number) | 4030661518800 |
| Mission time | 20 |
| Termination | rigid or flexible |
| Mechanical lifetime, minimum | 10,000,000 |
| Cable section, maximum | 2.5 mm² |
| Material of the contacts, electrical | AgSn0. self-cleaning, positive drive |
| Cable section, minimum | 0.25 mm² |
| Number of auxiliary contacts | 3 |
| Resistance to vibrations | 10 ... 55 Hz, Amplitude 0.35 mm |
| Storage and transport temperature | -40 ... +85 °C |
| Storage and transport temperature, maximum | +85 °C |
| Storage and transport temperature, minimum | -40 °C |
| Mounting | Snaps onto standard DIN rail to EN 60715 |
| Note (General) | Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit. |
| Degree of pollution | 2 |
| Other Parameters | Overvoltage category: III | Rated control voltage at AC 50 Hz, maximum: 244 | Common Cause Failure (CCF), minimum: 65 | Switching capacity, maximum: 2 | Rated AC voltage for controls, 60 Hz, minimum: 195 | Drop-out delay in case of emergency, typically: 20 | Current, Utilisation category DC-13: 6 | Performance Level, stop 0, up to: e | Integral system diagnostics, status: Yes | Restistance to shock: 10 g / 11 ms | Number of LEDs: 4 | Pull-in delay at automatic start, maximum, typically: 80 | Rated AC voltage for controls, 50 Hz, minimum: 195 | PFD value: 1.80 x 10⁻⁴ | Cross-circuit detection: Yes | Reset edge detection: Yes | Contact resistance, maximum: 0.1 | Frequency range: 50 | Rated operating voltage: 230 VAC -15% / + 10% | Indicated operating states: Position relay K1/K2 | Voltage type: AC | ELEC_UTILISAT_CAT_DC13_SROUT_S0_GPV: 24 VDC / 6 A | Terminal designations: EN 60947-1 | Start input: Yes | Rated control voltage at AC 60 Hz, maximum: 244 | Voltage, Utilisation category DC-13: 24 | Earth connection detection: Yes | Note (applications): Safety edges | Switching capacity, minimum: 10 | Width: 45 | IP Degree of protection of the installation space: IP54 | Cable section: 0.2 mm², rigid0.2 mm², flexible0.25 mm², flexible with ferrule ... 2.5 mm², rigid2.5 mm², flexible2.5 mm², flexible with ferrule | Operating voltage: 230 VAC -15 % / +6 % | EMC rating: EMC-Directive | Electrical power consumption: 6 | IP Degree of protection of clips or terminals: IP20 | PFH value, Stop 0: 2.00 x 10⁻⁸ | Wire breakage detection : Yes | TOL_VOLT_OPERAT_AC_MIN: -15 | Height: 120 | Removable Terminals: Yes | IP Degree of protection of the enclosure: IP40 | Number of Safety contacts, STOP 0: 3 | Diagnostic Coverage (DC) Level, Stop 0: ≥ 99 | Note (Contact resistance): in new state | Drop-out delay in case of power failure, typically: 50 | TOL_VOLT_OPERAT_AC_MAX: 6 | Pull-in delay at RESET, typically: 15 | Current, Utilisation category AC-15: 6 | Electronic Fuse: Yes | Safety Integrity Level (SIL), Stop 0, suitable for applications in: 3 | Tightening torque of Clips: 0.5 | Voltage, Utilisation category AC-15: 230 | Category, Stop 0: 3 | ELEC_UTILISAT_CAT_AC15_SROUT_S0_GPV: 230 VAC / 6 A | Stop-Category: 0 | Depth: 121 |
