Service Hotline
18070781637
Email
18070781637@163.com
Schmersal SRB-E-402FWS-TS (Order No: 103014757) is a genuine safety relays engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Mounting: Snaps onto standard DIN rail to ...; Curren...
Glorient offers competitive supply of Schmersal SRB-E-402FWS-TS, Order No: 103014757. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to SRB-E-402FWS-TS, Glorient also supplies:
| Current, Utilisation category DC-12 | 0.1 A |
| Switching capacity, maximum | 6 |
| Standards | EN IEC 62061 |
| Mechanical lifetime, minimum | 10,000,000 |
| Traceparts | Yes |
| Net weight | 190 g |
| Number of fail-safe digital outputs | 2 |
| Common Cause Failure (CCF), minimum | 65 |
| Number of safety contacts | 2 |
| Degree of pollution | 2 |
| Performance Level, up to | e |
| Note (applications) | safe standstill monitoring |
| Storage and transport temperature | -40 ... +85 °C |
| EPLAN | Yes |
| PFD value | 2.42 x 10⁻⁵ |
| PFH value | 1.25 x 10⁻⁸ |
| Integral system diagnostics, status | Yes |
| ETIM number, version 7.0 | EC001449 |
| Mission time | 20 |
| WEB_TYPE | Product range |
| Ambient temperature, minimum | -25 °C |
| Cross-circuit detection | Yes |
| Indicated operating states | Fault codes |
| Ripple voltage | 10 V |
| Current, Utilisation category DC-13 | 2 A |
| Basic quantity unit | Piece |
| Reset edge detection | Yes |
| Cable section, maximum | 2.5 mm² |
| Rated control voltage at DC, maximum | 28.8 V |
| Restistance to shock | 30 g / 11 ms |
| Operating current | 150 A |
| Drop-out delay in case of emergency, typically | 10 |
| Voltage, Utilisation category DC-12 | 24 V |
| Certificates | CCC |
| Contact resistance, maximum | 0.1 MΩ |
| Conduction resistance, maximum | 40 MΩ |
| Product group | Initial |
| Automatic reset function | Yes |
| Gross weight | 190 g |
| Start input | Yes |
| Number of inputs for NC | 4 |
| Switching capacity, minimum | 10 |
| CADENAS | Yes |
| Earth connection detection | Yes |
| eCl@ss number, version 9.0 | 27-37-18-19 |
| Operating voltage | 24 VDC -20 % / +20 % |
| ETIM number, version 6.0 | EC001449 |
| Voltage, Utilisation category DC-13 | 24 V |
| TOL_VOLT_OPERAT_DC_MAX | 20 |
| IP Degree of protection of the installation space | IP54 |
| eCl@ss number, version 11.0 | 27-37-18-19 |
| EAN (European Article Number) | 4030661511283 |
| Allowed type of cable | flexible |
| Height | 98 mm |
| Rated AC voltage for controls at DC minimum | 19.2 V |
| Cable section | 0.25 mm² ... 2.5 mm² |
| Storage and transport temperature, maximum | +85 °C |
| Storage and transport temperature, minimum | -40 °C |
| ELEC_UTILISAT_CAT_DC13_SROUT_GPV | 24 VDC / 4 A |
| Terminal designations | IEC 60947-1 |
| EMC rating | EMC-Directive |
| Drop-out delay in case of power failure, typically | 10 W |
| IP Degree of protection of clips or terminals | IP20 |
| Pull-in delay at RESET, typically | 150 |
| Wire breakage detection | Yes |
| Current, Utilisation category AC-15 | 4 A |
| TOL_VOLT_OPERAT_DC_MIN | -20 |
| eCl@ss number, version 12.0 | 27-37-18-19 |
| Housing material | Glass-fibre reinforced thermoplastic, ventilated |
| Rated operating voltage | 24 V |
| IP Degree of protection of the enclosure | IP40 |
| ELEC_UTILISAT_CAT_AC15_SROUT_GPV | 230 VAC / 4 A |
| Ambient temperature | -25 ... +60 °C |
| Resistance to vibrations | 10 ... 55 Hz, Amplitude 0.35 mm |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Number of LEDs | 6 |
| Switching frequency, maximum | 0.3 Hz |
| Width | 22.5 mm |
| Note (Contact resistance) | in new state |
| Depth | 115 |
| Utilisation category DC-13 | 24 VDC / 2 A |
| Ambient temperature, maximum | +60 °C |
| Category | 4 |
| Voltage type | DC |
| Number of inputs for NO | 2 |
| Cable section, minimum | 0.25 mm² |
| Electrical power consumption | 3 W |
| ON delay at automatic start | Adjustable |
| Electronic Fuse | Yes |
| Climatic stress | EN 60068-2-78 |
| Tightening torque of Clips | 0.5 |
| Material of the contacts, electrical | Ag-Ni, self-cleaning, positive drive |
| Mounting | Snaps onto standard DIN rail to EN 60715 |
| ACE reference article number | 11930881 |
| Number of auxiliary contacts | 1 |
| Stop-Category | 0 |
| Overvoltage category | III |
| Number of signalling outputs | 1 |
| Product type description | SRB-E-402FWS-TS |
| Pull-in delay at automatic start, maximum, typically | 150 |
| Voltage, Utilisation category AC-15 | 230 V |
| Terminal (mechanical) | Removable screw terminals |
| Utilisation category DC-12 | 24_0.1 |
