Service Hotline
18070781637
Email
18070781637@163.com
Schmersal SRB-E-201ST-CC (Order No: 103016569) is a genuine safety relays engineered for demanding industrial applications. Manufactured to original Schmersal quality standards. Specifications: Mounting: Snaps onto standard DIN rail to ...; Ambient...
Glorient offers competitive supply of Schmersal SRB-E-201ST-CC, Order No: 103016569. Competitive pricing, fast quotation.
Schmersal industrial automation component. Replacement part/accessory for Schmersal safety switch systems.
In addition to SRB-E-201ST-CC, Glorient also supplies:
| Gross weight | 200 g |
| Net weight | 200 g |
| Ambient temperature | -25 ... +60 °C |
| Ambient temperature, maximum | 1000079393 °C |
| Ambient temperature, minimum | -25 °C |
| Standards | EN IEC 60947-5-3 |
| Certificates | cULus |
| Housing material | Glass-fibre reinforced thermoplastic, ventilated |
| EAN (European Article Number) | 4030661511535 |
| Mission time | 20 |
| Cable section, maximum | 1.5 mm² |
| Utilisation category DC-13 | 24 VDC / 3.5 A |
| Cable section, minimum | 0.2 mm² |
| Traceparts | Yes |
| Resistance to vibrations | 10 ... 55 Hz, Amplitude 0.35 mm |
| Storage and transport temperature | -40 ... +85 °C |
| Storage and transport temperature, maximum | +85 °C |
| Storage and transport temperature, minimum | -40 °C |
| Mounting | Snaps onto standard DIN rail to EN 60715 |
| Degree of pollution | 2 |
| Other Parameters | Current, Utilisation category DC-12: 0.1 | Overvoltage category: III | Cable section: 0.2 mm² ... 1.5 mm² | Note (applications): Safety light curtain | Note (Relative humidity): non-condensing | EPLAN: Yes | Current, Utilisation category DC-13: 3.5 | PFH value: 2.66 x 10⁻⁹ | Integral system diagnostics, status: Yes | Number of safety digital outputs, Stop 0: 2 | Operating current: 100 | Terminal designations: IEC/EN 60947-1 | Utilisation category DC-12: 24 VDC / 5.5 A | Cross-circuit detection: Yes | Indicated operating states: Baustein-Status | Ripple voltage: 10 | Switching frequency, maximum: 1 | Reset edge detection: Yes | Rated control voltage at DC, maximum: 28.8 | Restistance to shock: 30 g / 11 ms | Drop-out delay in case of emergency, typically: 10 | Voltage, Utilisation category DC-12: 24 | Integral system diagnostics, error code: Yes | Conduction resistance, maximum: 40 | Number of normally open (NO): 1 | Automatic reset function: Yes | Start input: Yes | CADENAS: Yes | Earth connection detection: Yes | Performance Level, up to: e | Number of LEDs: 5 | Operating voltage: 24 VDC -20 % / +20 % | Voltage, Utilisation category DC-13: 24 | TOL_VOLT_OPERAT_DC_MAX: 20 | IP Degree of protection of the installation space: IP54 | Allowed type of cable: solid single-wire | Height: 98 | Rated AC voltage for controls at DC minimum: 19.2 | Number of normally closed (NC): 2 | EMC rating: EMC-Directive | Drop-out delay in case of power failure, typically: 10 | IP Degree of protection of clips or terminals: IP20 | Pull-in delay at RESET, typically: 150 | Wire breakage detection : Yes | TOL_VOLT_OPERAT_DC_MIN: -20 | Removable Terminals: Yes | Rated operating voltage: 24 VDC -20%/+20%, residual ripple max. 10% | IP Degree of protection of the enclosure: IP40 | Terminal (mechanical): Removable cage terminals | Width: 22.5 | Depth: 115 | PFD value: 2.42 x 10⁻⁵ | Category: 4 | Voltage type: DC | Electronic Fuse: Yes | Climatic stress: EN 60068-2-78 | Electrical power consumption: 2.4 | Stop-Category: 0 | Safety Integrity Level (SIL), suitable for applications in: 3 | Number of signalling outputs: 1 | Pull-in delay at automatic start, maximum, typically: 150 |
