Service Hotline
18070781637
Email
18070781637@163.com
The WIKA GDM-RC-100-T is built for demanding SF6 Gas Products environments. With Modbus ® interface or analog 4 ... 20 mA output signal. Key features include Ideal for smart grid and modern power plant requirements The and temperature and gas density measured values as digital signals.
Glorient offers competitive supply of WIKA GDM-RC-100-T. Competitive pricing, fast quotation.
WIKA GDM-RC-100-T - high-precision industrial measurement instrument.
WIKA is a global market leader in pressure and temperature measurement technology. With over 75 years of experience, WIKA instruments are trusted in process industries worldwide. Glorient is a professional supplier of genuine WIKA products with competitive pricing and fast worldwide delivery.
| Product Category | Sf6 Gas Products |
| Product Type | Gas density sensors |
| Summary | With Modbus ® interface or analog 4 ... 20 mA output signal |
| Applications | High-voltage equipment Monitoring the density of insulating gas in sealed gas compartments Remote monitoring of the insulating gas condition The instrument issues an alarm signal when the pointer reaches the warning set point |
| Key Features | Ideal for smart grid and modern power plant requirements The Modbus ® version transmits pressure, temperature and gas density measured values as digital signals The 4 ... 20 mA version outputs the absolute pressure at 20°C [68°F] or the gas density (g/l) as an analog signal Suitable for SF 6 and other alternative gases On-site display of the density and vacuum range on a 100-mm [3.94 in] dial |
| Description | For high-voltage switchgear, gas density is a critical operating parameter. If the gas density requirements are not met, safe operation of the equipment cannot be guaranteed. Even under extreme environmental conditions, WIKA gas density monitors reliably alarm against dangerous low-density conditions. If the gas density drops due to leakage, the switch contacts are actuated. In addition to conventional gas density monitoring, the GDM-RC-100-T incorporates high-precision sensors and computing circuitry. The pressure value at 20°C [68°F] can be read directly on the instrument via the on-site display. Integrated switch contacts enable simple switching tasks quickly and conveniently. The internal/external Modbus ® interface or 4 ... 20 mA sensor allows remote monitoring of the equipment. The measured data for pressure, temperature and gas density are transmitted using the standardized Modbus ® RTU protocol. The GDM-100-RC-T can also be configured for alternative gases, including nitrogen, carbon tetrafluoride, oxygen, carbon dioxide, 3M™, Novec™ 4710, helium and argon. The analog version of the GDM-100-RC-T uses proven 4 ... 20 mA analog signal technology and outputs the absolute pressure at 20°C [68°F] or the insulating gas density (g/l) as an analog signal. The stored data can be used for trend analysis, allowing critical insulating gas conditions to be predicted and corrected in a timely manner. Using the GDM-RC-100-T, time-based maintenance strategies can be optimized into condition-based maintenance strategies. TBM = Time-based maintenance CBM = Condition-based maintenance |
PG23HP-P | PGS25 | PMT10 | RLS-3000 | S-11 | TC97 | TG58SA | TI.80 | s TR10-AVG, TR15-AVG | TR45 | s TT.80, TT.82 | s TW.SW, TW20 | s A-AI-1, A-IAI-1, DI10, DI32-1 | 612.34, 632.34, 633.34 | 910.33 | 990.50 | CPA2501 | CTP1500 | DSS19F | DW03UN | F9841 | PG23CP | TC10-F | TCN | TR10-D | TR31 | TW40 | 101.00 | 111.25DW | s 212.34, 213.34
| Product Category | Sf6 Gas Products |
| Product Type | Gas density sensors |
| Summary | With Modbus ® interface or analog 4 ... 20 mA output signal |
| Applications | High-voltage equipment Monitoring the density of insulating gas in sealed gas compartments Remote monitoring of the insulating gas condition The instrument issues an alarm signal when the pointer reaches the warning set point |
| Key Features | Ideal for smart grid and modern power plant requirements The Modbus ® version transmits pressure, temperature and gas density measured values as digital signals The 4 ... 20 mA version outputs the absolute pressure at 20°C [68°F] or the gas density (g/l) as an analog signal Suitable for SF 6 and other alternative gases On-site display of the density and vacuum range on a 100-mm [3.94 in] dial |
| Description | For high-voltage switchgear, gas density is a critical operating parameter. If the gas density requirements are not met, safe operation of the equipment cannot be guaranteed. Even under extreme environmental conditions, WIKA gas density monitors reliably alarm against dangerous low-density conditions. If the gas density drops due to leakage, the switch contacts are actuated. In addition to conventional gas density monitoring, the GDM-RC-100-T incorporates high-precision sensors and computing circuitry. The pressure value at 20°C [68°F] can be read directly on the instrument via the on-site display. Integrated switch contacts enable simple switching tasks quickly and conveniently. The internal/external Modbus ® interface or 4 ... 20 mA sensor allows remote monitoring of the equipment. The measured data for pressure, temperature and gas density are transmitted using the standardized Modbus ® RTU protocol. The GDM-100-RC-T can also be configured for alternative gases, including nitrogen, carbon tetrafluoride, oxygen, carbon dioxide, 3M™, Novec™ 4710, helium and argon. The analog version of the GDM-100-RC-T uses proven 4 ... 20 mA analog signal technology and outputs the absolute pressure at 20°C [68°F] or the insulating gas density (g/l) as an analog signal. The stored data can be used for trend analysis, allowing critical insulating gas conditions to be predicted and corrected in a timely manner. Using the GDM-RC-100-T, time-based maintenance strategies can be optimized into condition-based maintenance strategies. TBM = Time-based maintenance CBM = Condition-based maintenance |
